Absolute gravity determination with JILAG-3 - improved data evaluation and instrumental technics

verfasst von
L. Timmen, R. H. Röder, M. Schnüll
Abstract

In addition to the on-line data evaluation during the measurements with the absolute gravity meter JILAG-3, a subsequently more intensive examination of the measured time/distance data pairs is performed. This allows an additional assessment of the gravity results, the station quality and the measurement conditions. Sinusoidal disturbances in the raw data deteriorate the determination of gravity. Incoming microseisms affect the mean result of the free-fall experiments randomly after a large number of measurements. Instrumental vibrations of the gravity meter during the measurement procedure may influence the gravity result systematically. A station comparison indicates that a 30 Hz frequency is triggered by JILAG-3 itself and influences the measurements depending on the stability of the foundation. Using a mathematical filter it is possible to separate the deteriorations from the gravity acceleration. Up to now an improvement in the absolute accuracy of gravity after filtering could not be proved, but an increase of the precision is indicated.

Organisationseinheit(en)
Institut für Erdmessung
Typ
Artikel
Journal
Bulletin Géodésique
Band
67
Seiten
71-80
Anzahl der Seiten
10
ISSN
0007-4632
Publikationsdatum
07.1993
Publikationsstatus
Veröffentlicht
Peer-reviewed
Ja
ASJC Scopus Sachgebiete
Geophysik, Geochemie und Petrologie, Entwicklungsbiologie, Computer in den Geowissenschaften
Elektronische Version(en)
https://doi.org/10.1007/BF01371370 (Zugang: Geschlossen)
 

Details im Forschungsportal „Research@Leibniz University“