Distributed Nonlinear Model Predictive Control for Connected Vehicles Trajectory Tracking and Collision Avoidance with Ellipse Geometry

verfasst von
Mohamed Elsayed Hasan Abdelaal, Steffen Schön

In the last decade, Model Predictive Control has drawn much attention from both academia and industry to be a successful guidance and control algorithm in autonomous driving because of its ability to handle complex nonlinear constrained systems, especially with the rapidly expanding technologies that enable fast implementation of its optimization problem. This paper considers Non-Cooperative Distributed Nonlinear Model Predictive Control (NMPC) for simultaneous trajectory tracking and collision avoidance of connected autonomous/semi-autonomous vehicles. The connected vehicles are considered as a Network Control System (NCS) of dynamically decoupled agents with only coupling constraints, and it is formulated as a distributed Optimal Control Problem (OCP). It is assumed that the connected vehicles have a communication link to exchange their intentions. The coordination among the agents is achieved by Priority-Based techniques where a priority is assigned for each one to satisfy the prediction consistency. For each agent, a nonlinear bicycle model is used to predict a sequence of the states and then optimize it with respect to a sequence of control inputs. The objective function of the OCP is to track the planned trajectory. In order to achieve a normal driving behavior, comfort driving, and provide consistency of the simplified kinematic model with the actual complex vehicle model, constraints are added to the control inputs and their rate of change. In order to achieve collision avoidance among the networked vehicles, a geometric shape must be selected to represent the vehicle geometry. In this paper, an elliptic disk is selected for that as it represents the geometry of the vehicle better that the traditional circular one. A separation condition between each pair of elliptic disks is formulated as time-varying state constraints for the OCP, and is proved by developing sufficient conditions for the separation. The algorithm is validated using MATLAB simulation with the aid of ACADO toolkit.

Fakultät für Bauingenieurwesen und Geodäsie
Institut für Erdmessung
Aufsatz in Konferenzband
Anzahl der Seiten
ASJC Scopus Sachgebiete
Software, Kommunikation, Information systems, Elektrotechnik und Elektronik, Computernetzwerke und -kommunikation, Angewandte Informatik
Elektronische Version(en)
https://doi.org/10.33012/2019.16911 (Zugang: Geschlossen)

Details im Forschungsportal „Research@Leibniz University“